I ended up getting 30M of 4-plex 3mm fiber optic cable to use to light my R7's front and rear logic displays and was wondering if anyone would be interested in...
The order was placed with the cutter and should be here soon. I am sure the holiday will slow him down. But I have my fingers crossed every time the UPS man...
Thanks for the Update Andrew! Can't wait for the skins! Getting Excited!!! Also, Good to hear news on the frame. I've been trying to decide whether to make...
My sugesstions are: 1. The rod/ coin slot interferance issue 2. Keep the sholder motor mount set up. 3. Rotate the rockler bearing mounting holes 45 degrees...
... Ok let's try this again as it appears the last one did not go through. 1. The rod has been pushed back to allow for clearance 2. The shoulders are set up...
I'm confused. Is there a large data port on an R7? Can you post DXF files for the new frame design? I will design a dome rotation system for it similar to...
... dome rotation system for it similar to the one I am doing for the other R series. ... frame? If so then the missing section on the ring was to accomodate ...
Alex, I see now which flat you are talking about. These flats on the sides of rings 3 and 4 hold a 5.1" X 5.062" aluminum plate that covers the flat area to...
... sides of rings 3 and 4 hold a 5.1" X 5.062" aluminum plate that covers the flat area to clear the ankle battery box. I attached a couple photos showing...
Hi again, On the top of the plate, I have milled the screw holes so that they are actually slots that go out to the top edge of the plate. I can remove the...
... are actually slots that go out to the top edge of the plate. I can remove the bottom two screws an then slide the plate out from the bottom. It is still...
I just checked the dimensions of a 12V7.2ah battery. I have the height as 3.7inches and the side flat panel is 3.90 inches high. The bottom plate would be...
Hi Alex, Yeah, I chose the 12V5AH for mine because they fit fairly well. It will actually fit fairly well if you lay the battery on its side, but some center...
YAY! So excited :o) cant wait to see them in person, they look beautiful from the pics you have shared. thanks for the update! Judy ... From: Andrew...
... beautiful from the pics you have shared. thanks for the update! ... This will give you a chance to put stuff together. Styrene is a fairly easy material...
... Oh I am sure i will have questions to ask lol! I am excited this will be my first big part to work with. I have a whole box of little things, now its...
The design for the R7 frame is coming along great. I have uploaded a couple of pictures of the wooden prototype I put together based on the plans that Alex...
Sure why not!! Actually one of the things Alex is working is to make sure it will be able to work with a linear Actuator to raise and lower middle leg. ... ...
... make sure it will be able to work with a linear Actuator to raise and lower middle leg. ... I guess the question is when to stop the design process and go...
I am currently working on the R7 frame with Andy. Like the skins we are trying to add as much stuff as we can. We are also working to make this frame usable...
I personally like the second photo. Tends to leave more space for stuff to be put in as well as having room after the hinges are installed. But that is my...
Someone did a run a while baclk on double sided adhesive tape from 3M. I have most of what I purchased left if anyone is interested. I got it ti adheare the...
I have Jerry's motor mounts for the Satellite motors if anyone is interested. I was planning on using them with my frame but the frame Alex and I are designing...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
