Hey Pix, Thanks for the comments can't wait to finish. Brenda


--- In r7droidbuilders@yahoogroups.com, pixelFiend <pxfiend@...>
wrote:
>
> Not to hijack the thread, but that's an awesome looking droid!  I
love the
> dome greeblies!  Great job you two...
>
> PF
>
> On Sun, Feb 8, 2009 at 9:56 PM, Calvin Thomas <ctx3201@...> wrote:
>
> >    I'll take some pics tomorrow and send them to you.
> > Her dome is mounted right now, But I need to do some work to it
tomorrow.
> > You can see it working at:
> > http://www.r3t7.blogspot.com/
> > SeeYa tomorrow :o)
> > Calvin
> >
> > -----Original Message-----
> > *From:* r7droidbuilders@yahoogroups.com [mailto:
> > r7droidbuilders@yahoogroups.com]*On Behalf Of *dyochem@...
> > *Sent:* Sunday, February 08, 2009 9:56 PM
> > *To:* r7droidbuilders@yahoogroups.com
> > *Subject:* Re: [r7droidbuilders] Scott Strong
> >
> >  Pic calvin :)
> >
> > Sent from my Verizon Wireless BlackBerry
> >
> > ------------------------------
> > *From*: "Calvin Thomas"
> > *Date*: Sun, 8 Feb 2009 21:46:59 -0500
> > *To*: <r7droidbuilders@yahoogroups.com>
> > *Subject*: RE: [r7droidbuilders] Scott Strong
> >
> >  This is what we did and if anyone is interested let me know
> > and I'll post some pics.
> > Calvin
> >
> > My Wife (Brenda) has a SSpin on her droid and we found away to
make a
> >
> > nice drive for it.
> >
> > We used a small 24v. motor (which is available in 12v. also)
> >
> > http://www.superdroidrobots.com/shop/item.asp?itemid=374&catid=7
> >
> > Sorry I don't know how to do the tiny Url thing.
> >
> > We used 2- 4" drive wheels (They come as a set)
> >
> > We just used a longer screw and a nut between the 2 wheels.
> >
> > http://www.servocity.com/html/precision_disk_wheels.html
> >
> > And this .250 adapter for the motor.
> >
> > http://www.servocity.com/html/set_screw_hubs.html
> >
> > The hardest part was prepping the SSpin.
> >
> > Her SSpin is mounted as if a kid was going to ride it.
> >
> > I noticed some people mount it upside down. (I hope yours is not)
> >
> > Under the SSpin there is a area where the marbles and the spacers
ride
> >
> > and there's a lip from the top half of the SSpin that rides on
each side of
> > the
> >
> > marble bearing.
> >
> > There is 4 heavier ribs on the top half that have to be cut down
and this
> >
> > will give you a smooth area for the drive wheel to turn the dome.
> >
> > Looking at the bottom you have 4 large holes and you can use 1 of
the rear
> > holes
> >
> > to insert the dome wheel/motor combo.
> >
> > I made a real simple version of Atomic Pickles dome motor holders
and it
> > all
> >
> > works perfectly.
> >
> > On Brenda's blog you can see it working and if your interested I
can get
> > some
> >
> > pics of how it fits and works.
> >
> > -----Original Message-----
> > *From:* r7droidbuilders@yahoogroups.com [mailto:
> > r7droidbuilders@yahoogroups.com]*On Behalf Of *Andy Schwartz
> > *Sent:* Sunday, February 08, 2009 7:57 PM
> > *To:* r7droidbuilders@yahoogroups.com
> > *Subject:* Re: [r7droidbuilders] Scott Strong
> >
> >  That's great.  Share, share, share!!
> >
> > Andy
> >
> > ----- Original Message -----
> > *From:* ctx3201 <ctx3201@...>
> > *To:* r7droidbuilders@yahoogroups.com
> > *Sent:* Sunday, February 08, 2009 6:54 PM
> > *Subject:* [r7droidbuilders] Scott Strong
> >
> >  Does anyone has his email addy?
> > I know he was using a Sit n Spin for a dome ring and I
> > don't think he found a way to use a dome motor.
> > I have it working and wanted to let him know.
> > Calvin
> >
> >
> >
>
>
>
> --
> PF
>
>
> astromechbuilder.com
> astromechfactory.com
>

-----Original Message-----
From: r7droidbuilders@yahoogroups.com [mailto:r7droidbuilders@yahoogroups.com]On Behalf Of dyochem@...
Sent: Sunday, February 08, 2009 9:56 PM
To: r7droidbuilders@yahoogroups.com
Subject: Re: [r7droidbuilders] Scott Strong

Pic calvin :)

Sent from my Verizon Wireless BlackBerry

---

From: "Calvin Thomas"
Date: Sun, 8 Feb 2009 21:46:59 -0500
To: <r7droidbuilders@yahoogroups.com>
Subject: RE: [r7droidbuilders] Scott Strong

This is what we did and if anyone is interested let me know

and I'll post some pics.

Calvin

My Wife (Brenda) has a SSpin on her droid and we found away to make a

nice drive for it.

We used a small 24v. motor (which is available in 12v. also)

http://www.superdroidrobots.com/shop/item.asp?itemid=374&catid=7

Sorry I don't know how to do the tiny Url thing.

We used 2- 4" drive wheels (They come as a set)

We just used a longer screw and a nut between the 2 wheels.

http://www.servocity.com/html/precision_disk_wheels.html

And this .250 adapter for the motor.

http://www.servocity.com/html/set_screw_hubs.html

The hardest part was prepping the SSpin.

Her SSpin is mounted as if a kid was going to ride it.

I noticed some people mount it upside down. (I hope yours is not)

Under the SSpin there is a area where the marbles and the spacers ride

and there's a lip from the top half of the SSpin that rides on each side of the

marble bearing.

There is 4 heavier ribs on the top half that have to be cut down and this

will give you a smooth area for the drive wheel to turn the dome.

Looking at the bottom you have 4 large holes and you can use 1 of the rear holes

to insert the dome wheel/motor combo.

I made a real simple version of Atomic Pickles dome motor holders and it all

works perfectly.

On Brenda's blog you can see it working and if your interested I can get some

pics of how it fits and works.

-----Original Message-----
From: r7droidbuilders@yahoogroups.com [mailto:r7droidbuilders@yahoogroups.com]On Behalf Of Andy Schwartz
Sent: Sunday, February 08, 2009 7:57 PM
To: r7droidbuilders@yahoogroups.com
Subject: Re: [r7droidbuilders] Scott Strong

That's great.  Share, share, share!!

 

Andy

----- Original Message -----

From: ctx3201

To: r7droidbuilders@yahoogroups.com

Sent: Sunday, February 08, 2009 6:54 PM

Subject: [r7droidbuilders] Scott Strong

Does anyone has his email addy?
I know he was using a Sit n Spin for a dome ring and I
don't think he found a way to use a dome motor.
I have it working and wanted to let him know.
Calvin

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: r7droidbuilders@yahoogroups.com [mailto:r7droidbuilders@yahoogroups.com]On Behalf Of Andy Schwartz
Sent: Sunday, February 08, 2009 7:57 PM
To: r7droidbuilders@yahoogroups.com
Subject: Re: [r7droidbuilders] Scott Strong

That's great.  Share, share, share!!

 

Andy

----- Original Message -----

From: ctx3201

To: r7droidbuilders@yahoogroups.com

Sent: Sunday, February 08, 2009 6:54 PM

Subject: [r7droidbuilders] Scott Strong

Does anyone has his email addy?
I know he was using a Sit n Spin for a dome ring and I
don't think he found a way to use a dome motor.
I have it working and wanted to let him know.
Calvin

----- Original Message -----

From: ctx3201

To: r7droidbuilders@yahoogroups.com

Sent: Sunday, February 08, 2009 6:54 PM

Subject: [r7droidbuilders] Scott Strong

Does anyone has his email addy?
I know he was using a Sit n Spin for a dome ring and I
don't think he found a way to use a dome motor.
I have it working and wanted to let him know.
Calvin

Does anyone has his email addy?
I know he was using a Sit n Spin for a dome ring and I
don't think he found a way to use a dome motor.
I have it working and wanted to let him know.
Calvin

----- Original Message -----

From: Andy Schwartz

To: astromechs@yahoogroups.com ; r7droidbuilders@yahoogroups.com ; R2DC@yahoogroups.com

Cc: R2 Builders Group

Sent: Tuesday, December 30, 2008 2:34 PM

Subject: [r2builders] Time for another A&A parts run!

Despite the economy this year Santa must have been good to a lot of droid builders as I have hat a ton of requests for parts.  So We are going to open up an A&A parts run for the next few weeks.  The run will be open until Jan 25th.  As always all parts include shipping in the USA. Additional shipping is required elsewhere.

 

A&A Inner Door Details - $20
A&A Feet Shell Kit - $160
A&A K9 Kit - $200
A&A Body Kit - $900 
        1 set of skins
        1 frame
        1 set of legs
        1 set of feet shells
        1 skirt

A&A Skirt - $60
A&A R2 Skins with extras - $115
A&A Skin Extras only - $65
A&A Dome ring for C&J dome - $35
A&A Frame - $240
A&A Frame with Rocklear Gearset - $270
A&A Rocklear gearset - $60
A&A Tray - $190 (2 or 3 legged mode please specify)
A&A Tray with both sets of legs ( 2 and 3 legged mode) - $275
A&A Tray add on legs to convert tray from 2 legged mode to 3 - $95
A&A Leg set (all three legs with layered shoulders) - $400

A&A Set of layered Shoulders - $75
A&A PSI Lens kit - $6 (now with 3 lenses, 2 PSI and one rear pannel lens)
A&A Scooter Motor Holder - $125
A&A Feet Shell/ Scooter Motor Holder Kit $275
A&A R5 Dome kit (Frame and Flatpack) - $110

A&A R5 Dome Frame - $60
A&A R5 Dome Flatpack - $60

A&A Dome mounting plate with extras $80

A&A Dome mounting Plate no extras $68

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~
Fine Print area:

As always all parts include shipping in the continental US.
Additional shipping required elsewhere and will be calculated after
parts are made and ready to ship.

No Sign up list, just Paypal to andyman61533 @ yahoo.com

*Be sure to list the parts your buying in the paypal description*

Please let me know if these are being shipped to a business.

Non US orders please include telephone contact info with shipping
info.  I need this for customs.

Pictures of parts are posted here:
http://astromechbuilder.com/mechloader/v/R7Dude/Parts/

----- Original Message -----

From: astromech_kuhns

To: r7droidbuilders@yahoogroups.com

Sent: Tuesday, November 04, 2008 6:46 PM

Subject: [r7droidbuilders] Re: R7 verse R2

i would have to get a dome but i would also be interested in it if we
can get nine people other than me then let me know and ill try to ge
t a dome and top it off to make ten people but you will have to let
me know and its only a possibility. did you say daren would be doing
he laser cuttng?

--- In r7droidbuilders@yahoogroups.com, "Jerry Chevalier"
<jerrychevalier@...> wrote:
>
> I would be too
>
>
>
> From: r7droidbuilders@yahoogroups.com
> [mailto:r7droidbuilders@yahoogroups.com] On Behalf Of Anna
> Sent: Thursday, October 30, 2008 6:47 AM
> To: r7droidbuilders@yahoogroups.com
> Subject: Re: [r7droidbuilders] Re: R7 verse R2
>
>
>
>
> I'd be in.
>
> Rob
>
> --- On Wed, 10/29/08, Andy Schwartz <andyman61533@...> wrote:
>
> From: Andy Schwartz <andyman61533@...>
> Subject: Re: [r7droidbuilders] Re: R7 verse R2
> To: r7droidbuilders@yahoogroups.com
> Date: Wednesday, October 29, 2008, 9:35 PM
>
> possibly
>
>
>
> ----- Original Message -----
>
> From: astromech_kuhns <mailto:astromech_kuhns@...>
>
> To: r7droidbuilders@ yahoogroups. com
> <mailto:r7droidbuilders@yahoogroups.com>
>
> Sent: Saturday, October 25, 2008 10:58 PM
>
> Subject: [r7droidbuilders] Re: R7 verse R2
>
>
>
> so if we got ten interested peoole we could have the styrene domes
> laser cut for us?
> --- In r7droidbuilders@ <mailto:r7droidbuilders@yahoogroups.com>
> yahoogroups. com, "Doug Olson" <doug.olson@ ...>
> wrote:
> >
> > I would gladly ship my R&J blank dome to get it laser cut for the
> right price, but sadly I can't find a capable shop.
> > Sent via BlackBerry from T-Mobile
> >
> > -----Original Message-----
> > From: Jon Stokes <apwartrigit@ ...>
> >
> > Date: Fri, 24 Oct 2008 21:49:48
> > To: <r7droidbuilders@ yahoogroups. com
> <mailto:r7droidbuilders%40yahoogroups.com> >
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> >
> > but Alex did make up a nice schematic for the R7 dome panels
didn't
> he Andy?
> > I think that would work well with the C&J styrene domes.
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: Andrew Schwartz <andyman61533@ ...>
> > To: r7droidbuilders@ <mailto:r7droidbuilders%40yahoogroups.com>
> yahoogroups. com
> > Sent: Friday, October 24, 2008 9:46:37 PM
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> >
> > I couldn't get the numbers to make it cost
> > effective.
> >
> > Andy
> > ----- Original Message -----
> > From: Jon Stokes
> > To: r7droidbuilders@ yahoogroups. com
> > Sent: Saturday, October 25, 2008 12:01 AM
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> > With the R7 skins offered by A&A it is not significantly harder.
> > The only major difference is the R7 has 4 front logics instead of
> 2.
> > Andy was looking at making an aluminum R7 dome.
> > I don't know if that ever happened or not.
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: astromech_kuhns <astromech_kuhns@ yahoo.com>
> > To: r7droidbuilders@ yahoogroups. com
> > Sent: Monday, October 20, 2008 10:13:23 PM
> > Subject: [r7droidbuilders] R7 verse R2
> >
> >
> > so is it alot harder to make a R7 than it is a R2?
> >
>

----- Original Message -----

From: Doug Olson

To: r7droidbuilders@yahoogroups.com

Sent: Tuesday, November 04, 2008 7:21 PM

Subject: [r7droidbuilders] R7 Skins

I need some skin tips. I am trying to figure out a good way to assemble and paint my 2 layer skins. My concern is the door panels. If I want opening doors these need to somehow be shaped. If I attach the inner skins uncut, then glue together the outers on them, will the tension differences hold when I cut out panels?
Sent via BlackBerry from T-Mobile

I need some skin tips.  I am trying to figure out a good way to assemble and
paint my 2 layer skins.  My concern is the door panels.  If I want opening doors
these need to somehow be shaped. If I attach the inner skins uncut, then glue
together the outers on them, will the tension differences hold when I cut out
panels?
Sent via BlackBerry from T-Mobile

ok so when i was going ot make my r2 rather than r7 i was going to have
multiple colors and it was going to be weatherd. my dome was going to
be a cool black primer that i saw on a dome daren was laser cutting and
i loved the color. the logic displays were going to be red and then
there was going to be some white on the skins and then some peices were
gonna look aluminuim. it was going to be random whatever looks cool
colors for my droid with weathering. but now im making a r7 it feels
that its the type of droid that needs to be more formul like no
weathering and a paint scheme is needed i think its more like that in
my mind because the r7 were new and all and you never realy seeen them
damaged or without a paint scheme so it just feels like i need a paint
scheme and no weathering. on astromech.net there was a forum about
weathering droids and it was said that not weathering them makes them
look factory fress and not real. but in my mind im thinking that the r7
droids are factory fresh droids that would look horrible with
weathering yet i havent seen one thats weathered
any takes? opinions? does it look better without weathering?

i would have to get a dome but i would also be interested in it if we
can get nine people other than me then let me know and ill try to ge
t a dome and top it off to make ten people but you will have to let
me know and its only a possibility. did you say daren would be doing
he laser cuttng?

--- In r7droidbuilders@yahoogroups.com, "Jerry Chevalier"
<jerrychevalier@...> wrote:
>
> I would be too
>
>
>
> From: r7droidbuilders@yahoogroups.com
> [mailto:r7droidbuilders@yahoogroups.com] On Behalf Of Anna
> Sent: Thursday, October 30, 2008 6:47 AM
> To: r7droidbuilders@yahoogroups.com
> Subject: Re: [r7droidbuilders] Re: R7 verse R2
>
>
>
>
> I'd be in.
>
> Rob
>
> --- On Wed, 10/29/08, Andy Schwartz <andyman61533@...> wrote:
>
> From: Andy Schwartz <andyman61533@...>
> Subject: Re: [r7droidbuilders] Re: R7 verse R2
> To: r7droidbuilders@yahoogroups.com
> Date: Wednesday, October 29, 2008, 9:35 PM
>
> possibly
>
>
>
> ----- Original Message -----
>
> From: astromech_kuhns <mailto:astromech_kuhns@...>
>
> To: r7droidbuilders@ yahoogroups. com
> <mailto:r7droidbuilders@yahoogroups.com>
>
> Sent: Saturday, October 25, 2008 10:58 PM
>
> Subject: [r7droidbuilders] Re: R7 verse R2
>
>
>
> so if we got ten interested peoole we could have the styrene domes
> laser cut for us?
> --- In r7droidbuilders@ <mailto:r7droidbuilders@yahoogroups.com>
> yahoogroups. com, "Doug Olson" <doug.olson@ ...>
> wrote:
> >
> > I would gladly ship my R&J blank dome to get it laser cut for the
> right price, but sadly I can't find a capable shop.
> > Sent via BlackBerry from T-Mobile
> >
> > -----Original Message-----
> > From: Jon Stokes <apwartrigit@ ...>
> >
> > Date: Fri, 24 Oct 2008 21:49:48
> > To: <r7droidbuilders@ yahoogroups. com
> <mailto:r7droidbuilders%40yahoogroups.com> >
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> >
> > but Alex did make up a nice schematic for the R7 dome panels
didn't
> he Andy?
> > I think that would work well with the C&J styrene domes.
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: Andrew Schwartz <andyman61533@ ...>
> > To: r7droidbuilders@ <mailto:r7droidbuilders%40yahoogroups.com>
> yahoogroups. com
> > Sent: Friday, October 24, 2008 9:46:37 PM
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> >
> > I couldn't get the numbers to make it cost
> > effective.
> >
> > Andy
> > ----- Original Message -----
> > From: Jon Stokes
> > To: r7droidbuilders@ yahoogroups. com
> > Sent: Saturday, October 25, 2008 12:01 AM
> > Subject: Re: [r7droidbuilders] R7 verse R2
> >
> > With the R7 skins offered by A&A it is not significantly harder.
> > The only major difference is the R7 has 4 front logics instead of
> 2.
> > Andy was looking at making an aluminum R7 dome.
> > I don't know if that ever happened or not.
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: astromech_kuhns <astromech_kuhns@ yahoo.com>
> > To: r7droidbuilders@ yahoogroups. com
> > Sent: Monday, October 20, 2008 10:13:23 PM
> > Subject: [r7droidbuilders] R7 verse R2
> >
> >
> > so is it alot harder to make a R7 than it is a R2?
> >
>

----- Original Message -----

From: astromech_kuhns

To: r7droidbuilders@yahoogroups.com

Sent: Saturday, October 25, 2008 10:58 PM

Subject: [r7droidbuilders] Re: R7 verse R2

so if we got ten interested peoole we could have the styrene domes
laser cut for us?
--- In r7droidbuilders@yahoogroups.com, "Doug Olson" <doug.olson@...>
wrote:
>
> I would gladly ship my R&J blank dome to get it laser cut for the
right price, but sadly I can't find a capable shop.
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: Jon Stokes <apwartrigit@...>
>
> Date: Fri, 24 Oct 2008 21:49:48
> To: <r7droidbuilders@yahoogroups.com>
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> but Alex did make up a nice schematic for the R7 dome panels didn't
he Andy?
> I think that would work well with the C&J styrene domes.
>
>
>
>
> ________________________________
> From: Andrew Schwartz <andyman61533@...>
> To: r7droidbuilders@yahoogroups.com
> Sent: Friday, October 24, 2008 9:46:37 PM
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> I couldn't get the numbers to make it cost
> effective.
>
> Andy
> ----- Original Message -----
> From: Jon Stokes
> To: r7droidbuilders@ yahoogroups. com
> Sent: Saturday, October 25, 2008 12:01 AM
> Subject: Re: [r7droidbuilders] R7 verse R2
>
> With the R7 skins offered by A&A it is not significantly harder.
> The only major difference is the R7 has 4 front logics instead of
2.
> Andy was looking at making an aluminum R7 dome.
> I don't know if that ever happened or not.
>
>
>
>
> ________________________________
> From: astromech_kuhns <astromech_kuhns@ yahoo.com>
> To: r7droidbuilders@ yahoogroups. com
> Sent: Monday, October 20, 2008 10:13:23 PM
> Subject: [r7droidbuilders] R7 verse R2
>
>
> so is it alot harder to make a R7 than it is a R2?
>

so if we got ten interested peoole we could have the styrene domes
laser cut for us?
--- In r7droidbuilders@yahoogroups.com, "Doug Olson" <doug.olson@...>
wrote:
>
> I would gladly ship my R&J blank dome to get it laser cut for the
right price, but sadly I can't find a capable shop.
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: Jon Stokes <apwartrigit@...>
>
> Date: Fri, 24 Oct 2008 21:49:48
> To: <r7droidbuilders@yahoogroups.com>
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> but Alex did make up a nice schematic for the R7 dome panels didn't
he Andy?
> I think that would work well with the C&J styrene domes.
>
>
>
>
> ________________________________
> From: Andrew Schwartz <andyman61533@...>
> To: r7droidbuilders@yahoogroups.com
> Sent: Friday, October 24, 2008 9:46:37 PM
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> I couldn't get the numbers to make it cost
> effective.
>
> Andy
> ----- Original Message -----
> From: Jon  Stokes
> To: r7droidbuilders@ yahoogroups. com
> Sent: Saturday, October 25, 2008 12:01  AM
> Subject: Re: [r7droidbuilders] R7 verse  R2
>
> With the R7 skins offered by A&A it is not significantly  harder.
> The only major difference is the R7 has 4 front logics instead of
2.
> Andy was looking at making an aluminum R7 dome.
> I don't know if that  ever happened or not.
>
>
>
>
> ________________________________
>  From: astromech_kuhns <astromech_kuhns@ yahoo.com>
> To: r7droidbuilders@ yahoogroups. com
> Sent: Monday, October 20, 2008 10:13:23  PM
> Subject: [r7droidbuilders]  R7 verse R2
>
>
> so is it alot harder to make a R7 than it is a  R2?
>

Sent via BlackBerry from T-Mobile

----- Original Message -----

From: Jon Stokes

To: r7droidbuilders@yahoogroups.com

Sent: Saturday, October 25, 2008 12:49 AM

Subject: Re: [r7droidbuilders] R7 verse R2

but Alex did make up a nice schematic for the R7 dome panels didn't he Andy?
I think that would work well with the C&J styrene domes.

---

From: Andrew Schwartz <andyman61533@yahoo.com>
To: r7droidbuilders@yahoogroups.com
Sent: Friday, October 24, 2008 9:46:37 PM
Subject: Re: [r7droidbuilders] R7 verse R2

I couldn't get the numbers to make it cost effective.

 

Andy

----- Original Message -----

From: Jon Stokes

To: r7droidbuilders@ yahoogroups. com

Sent: Saturday, October 25, 2008 12:01 AM

Subject: Re: [r7droidbuilders] R7 verse R2

With the R7 skins offered by A&A it is not significantly harder.
The only major difference is the R7 has 4 front logics instead of 2.
Andy was looking at making an aluminum R7 dome.
I don't know if that ever happened or not.

---

From: astromech_kuhns <astromech_kuhns@ yahoo.com>
To: r7droidbuilders@ yahoogroups. com
Sent: Monday, October 20, 2008 10:13:23 PM
Subject: [r7droidbuilders] R7 verse R2

so is it alot harder to make a R7 than it is a R2?

----- Original Message -----

From: Jon Stokes

To: r7droidbuilders@yahoogroups.com

Sent: Saturday, October 25, 2008 12:01 AM

Subject: Re: [r7droidbuilders] R7 verse R2

With the R7 skins offered by A&A it is not significantly harder.
The only major difference is the R7 has 4 front logics instead of 2.
Andy was looking at making an aluminum R7 dome.
I don't know if that ever happened or not.

---

From: astromech_kuhns <astromech_kuhns@yahoo.com>
To: r7droidbuilders@yahoogroups.com
Sent: Monday, October 20, 2008 10:13:23 PM
Subject: [r7droidbuilders] R7 verse R2

so is it alot harder to make a R7 than it is a R2?

$100 /set including shipping.

Reply off-board.

Contact: astroparts at gmail dot com

so is it alot harder to make a R7 than it is a R2?

----- Original Message -----

From: Andrew Schwartz

To: r7droidbuilders@yahoogroups.com ; R2DC ; r2dc@... ; R2DC@yahoogroups.com ; astromechs@yahoogroups.com ; r2builders@yahoogroups.com

Sent: Monday, October 13, 2008 9:39 AM

Subject: [astromechs] Screaming Tiki Con

The con is this weekend and it looks like its going to be a great one!  If your coming for sure please get me your name and what your bringing so i can mark you down for a free pass.

 

 

 

Andy

Sent via BlackBerry from T-Mobile