so if we got ten interested peoole we could have the styrene domes
laser cut for us?
--- In r7droidbuilders@yahoogroups.com, "Doug Olson" <doug.olson@...>
wrote:
>
> I would gladly ship my R&J blank dome to get it laser cut for the
right price, but sadly I can't find a capable shop.
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: Jon Stokes <apwartrigit@...>
>
> Date: Fri, 24 Oct 2008 21:49:48
> To: <r7droidbuilders@yahoogroups.com>
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> but Alex did make up a nice schematic for the R7 dome panels didn't
he Andy?
> I think that would work well with the C&J styrene domes.
>
>
>
>
> ________________________________
> From: Andrew Schwartz <andyman61533@...>
> To: r7droidbuilders@yahoogroups.com
> Sent: Friday, October 24, 2008 9:46:37 PM
> Subject: Re: [r7droidbuilders] R7 verse R2
>
>
> I couldn't get the numbers to make it cost
> effective.
>
> Andy
> ----- Original Message -----
> From: Jon Stokes
> To: r7droidbuilders@ yahoogroups. com
> Sent: Saturday, October 25, 2008 12:01 AM
> Subject: Re: [r7droidbuilders] R7 verse R2
>
> With the R7 skins offered by A&A it is not significantly harder.
> The only major difference is the R7 has 4 front logics instead of
2.
> Andy was looking at making an aluminum R7 dome.
> I don't know if that ever happened or not.
>
>
>
>
> ________________________________
> From: astromech_kuhns <astromech_kuhns@ yahoo.com>
> To: r7droidbuilders@ yahoogroups. com
> Sent: Monday, October 20, 2008 10:13:23 PM
> Subject: [r7droidbuilders] R7 verse R2
>
>
> so is it alot harder to make a R7 than it is a R2?
>