... Means you're out-of-memory. Okay, RAM to be precise. At 1.5GB that's not a shocker, but as likely to be a "bug" as not unless you are working on very...
If you have QT on Windows and lots of disk space, you can try exporting out in the Animation codec and then re-encoding to something you can use on the Nitris....
i am doing a 16 mm project and i need to know the pitfalls: 1- when they telecine to the DV tapes i will capture from, how do I make sure they give me correct...
Well there is no hard and fast answer to your question but I will try and give you the quick not to tech answer. First you need to decide if you are going to...
... I just want to jump in here and say that actually I think it's critical that you get window burns with keycode and timecode information if you plan to cut ...
I agree with most of what you have said. However, you have made some assumption about the work flow and about the final output that I was unwilling to make. I...
... Thanks Tod. I believe it is a bug. Associated with my premature upgrade to 10.3.5. I'm downgrading this weekend. mark -- G4 Dual 1gig---1.5G RAM ...
The Capture Now problem has always been intermittent for me, too. If you ever figure out what's causing it, I'd love to hear it. Now a question for you -- is...
... Rainer, We put Hitachi 7K400 400 Gb drives in combo and boot off and external FW800 Lacie. You can get up to 1.6 Tb internally. I tried five drives (the...
Tod writes: <<Nope. Avid can't do Pro50 or ProHD native.>> Not exactly true. Adrenaline can do DV 50, and Xpress Pro 4.5 can play back DV 50 if you capture...
tcurren@...
Sep 2, 2004 11:50 am
13531
If you are having you audio sync'd in telecine I would also suggest that you have the audio tape's time code window burned. I'm not sure if Cinema Tool has...
... Careful. Newer Apple apps require 10.3. DVDSP3 and FCP4.5 for instance. Don't downgrade to an OS that won't support the other apps you want to use....
Usually means a corrupt file in the timeline. Check the last effect you did. Delete it and see if the error goes away. It has nothing to do with memory...
Bill Affleck
baffleck@...
Sep 2, 2004 2:40 pm
13534
Torrey, where did you put the third and fourth drive? Rainer...
Rainer Standke
rainer_s@...
Sep 2, 2004 3:21 pm
13535
... Drive bays A and B are used for drives 1 and 2. The Swift Data bays hold drives 3 and 4. Then, I boot off an external FW800 Lacie. Works like a charm. ...
How many watts is the G5 powersupply rated at? I'm kind of surprised that one extra drive would take up that much power load-I'm assuming that they only take...
Not to speak for another Mark, but I think he was referring to downgrading to 10.3.4, rather than to Jaguar (10.2). I downgraded to 10.3.4 yesterday, and...
tIts not paranoia. I had a problem that caused me to lose all data on my Huge HMV-400. Turns out, the firmware on my array needed to be upgraded before...
... Jason, From what I can tell, the specs say that the supply is rated at 600W. From a cold boot, the computer would start up and immediately pop off. ...
You didn't mention anything about needing a negative cut or how you were going to online and finish. You have some options. You could telecine to D5 HD @...
... That's a LOT of power and would surprise me. In any case, I would suspect it's a cold rating and many of us don't run systems cold. Many PSU drop power...
Indeed I did downgrade to 10.3.4 and my crashing and out of memory problems ceased. Yes, there have been posts warning of crashing on Quicksilver G4s with...
Anyone know why all of my 10bit renders have suddenly decided to be green screens? Happens on both timelines on any render. Doesn't happen on a DV timeline or...
... Good suggestion----no go, same problem. This time I downloaded the drivers off the blackmagic site. I trashed FCP preferences--same problem. more...
On 9/03/04 10:28 AM, Mark Coffey wrote: Indeed I did downgrade to 10.3.4 and my crashing and out of memory problems ceased. Yes, there have been posts warning...
I just noticed that I have a picture of a dog on my e-mail. If anybody knows how to get rid of this picture please let me know. I'm on a Mac G4 powerbook...
